We have these great windmill kits made for us here in the USA. Very simple to put together - you can be generating wind power in an hour or 2!
Constructed from simple materials like sheet plastic and PVC pipe, these small wind turbines are perfect for someone who wants to experiment with wind energy or for a small cabin system.
Comes complete with 20 feet of wire, ring terminals to go to your 12V battery and everything else you need to build your turbine. Starts charging at a very low wind speed, 3-4 mph. Blocking diode is installed and no charge controller is required.
NOTE: Maximum wind speed for this turbine is 20 mph. These simple turbines do not have advanced speed control mechanisms.
We can not accept returns for turbines damaged by higher wind speeds.
Output max. 2.25 amps @ max. 22V. Typical output is less than 1 amp.
Optimum wind speed: 15 mph
Max. wind speed: 20 mph
Unit designed to sit on 1" electrical EMT pipe (available at hardware and home improvement stores) for your pole (not included).
Does not include battery, we recommend a min. of 32 amp-hr AGM battery.
Blades are 12" long, diameter of prop about 25". Unit is about 20" long from tip of prop to end of tail fin.
Complete instructions included.